NEW 2018: 3-GALLON AND 5-GALLON VERSIONS!

NOTE: Intended only for the temporary transport of liquid hydrocarbons for racing vehicles used in professional off road and closed course competition racing events. The Gas Bag Fuel Safe Bladder is not a portable or long-term fuel storage container as described by ASTM, EPA, ARB or other state or federal agencies. BY PURCHASING PRODUCT AND FILLING IT WITH FUEL YOU ARE AGREEING TO THE TERMS AND CONDITIONS LISTED HERE ON THIS PAGE.

ADD AN EZ POUR SPOUT FOR CONVENIENT FUEL DISPENSING DURING OFF-ROAD RACING!
Get the Gas Bag Fuel Safe Bladder Kit, which includes a pair of Giant Loop’s adventure proof Pronghorn Straps plus a FREE 3 -Pack of Fast Funnel Professional Disposable Fuel Funnels!

Giant Loop’s Gas Bag™ Fuel Safe Bladder conveniently transports  your fuel for power sports racing in a collapsible welded film and ballistic nylon reinforced container that rolls up or packs flat when empty, weighing less than 1 pound. Gas Bag Fuel Safe Bladders are compatible with motorcycles, snowmobiles, snow bikes (e.g., Timbersled, Moto Trax), ATVs, UTVs and 4x4s, providing a lightweight, compact means of transporting gas for off-road racing on closed courses.

Winner of Powersports Business “Nifty 50” best new products for 2016!

Each Gas Bag Fuel Safe Bladder is individually pressure tested and made in USA by Fuel Safe, a leading racing fuel containment manufacturer based in Oregon.

• Available in 1-, 2-, 3- and 5-Gallon versions
• Compatible with most petroleum fuels, including gasoline, diesel, kerosene, and jet. NOT COMPATIBLE WITH HIGH ETHANOL FUELS.
• Volumes: 1 gallon maximum capacity (3.8 liters), 2 gallon maximum capacity (7.6 liters), 3 gallon maximum capacity (11.3 liters), 5 gallon maximum capacity (18.9 liters)
• Empty Weights: 11.5 oz (1 Gallon); 15.6 oz (2 Gallon); 21 oz (3 Gallon); 28 oz (5 Gallon)
• Dimensions (flat and unfilled): 19.5″ long x 9.5″ wide (1 Gallon); 22″ long x 11.24″ wide (2 Gallon); 22″ long x 14″ wide (3 Gallon); 30″ long x 15″ wide (5 Gallon)
• Rolled diameter (empty): approximately 4-10″
• Filler neck is standard size, fits “universal” spouts such as EZ-Pour
• Materials & Construction: Welded film bladder sewn into ballistic nylon sleeve with webbing daisy chain anchor points and handles.
• Made in U.S.A.

The Giant Loop Gas Bag™ Fuel Safe Bladder is intended only for the temporary transport of liquid hydrocarbons for racing vehicles used in professional off road and closed course competition racing events only. The Gas Bag Fuel Safe Bladder is not a portable or long-term fuel storage container as described by ASTM, EPA, ARB or other state or federal agencies. By purchasing and filling this product with fuel, you agree that you have been trained in the safe handling of racing fuels; you agree that you will use the product for its designed and intended purpose; you assume all responsibility for the proper safe use of this product.
1. GENERAL WARRANTIES OF SELLER. THE MATERIALS AND PRODUCTS ARE SUPPLIED “AS IS” AND “WITH ALL FAULTS”. No warranties except those implied by law and which cannot be excluded are given by Seller, its manufacturers, distributors, owners, employees, directors, vendors, promoters, parent companies or affiliates in respect of the materials and products supplied. SELLER EXPRESSLY DISCLAIMS THE IMPLIED WARRANTIES OF MERCHANTABILITY AND OF FITNESS FOR A PARTICULAR PURPOSE.

2. DISCLAIMER OF PRODUCT LIABILITY AND LIMITATION OF REMEDIES.Notwithstanding Seller’s excellent safety record; RACING, PIT STOPS AND FLAMMABLE FUEL HANDLING ARE INHERENTLY VERY DANGEROUS ACTIVITIES. IN ADDITION, RUBBER PRODUCTS DETERIORATE RAPIDLY WHEN EXPOSED TO LIGHT, HEAT OR REPEATED STRETCHING AND FLEXING. SUCH DETERIORATION MATERIALLY AFFECTS THE USEFUL LIFE OF RUBBER PRODUCTS.
The Buyer acknowledges and warrants that it has relied on its own skill and judgment or that of its professional advisers on the suitability of the materials or products for specific purposes and indemnifies and holds Seller harmless from and against any suit, claim, demand or compensation which the user or consumer or others may have against Seller in relation to the materials or products provided hereunder and the user or consumer’s use of the products or materials.
Where it is lawful to do so, the liability of Seller for a breach of a condition or warranty is limited to either the rectification or replacement of the materials or products or a refund of the purchase price paid for the materials or products (excluding any delivery charges), as determined by Seller in its discretion. This remedy is expressly agreed to be exclusive. To the extent permitted by law, Seller will not be liable for any consequential loss or damage suffered as a result of the use of materials or products supplied by Seller. ALL RISKS ARE ASSUMED BY THE USER OR CONSUMER.

3. TITLE AND RISK OF LOSS. Title to, and all risk of loss of, any materials or products sold hereunder shall pass to the Buyer at the point of shipment.

4. FORCE MAJEURE. Seller may, without liability, delay performance or cancel this contract on account of force majeure events or other circumstances beyond its control, including but not limited to strikes, acts of God, political unrest, embargo, failure of source of supply, or casualty.

5. GOVERNING LAW; VENUE. The parties agree this contract shall be governed by the domestic law of the State of Oregon. Venue of any action or claim shall be brought exclusively in a court of competent jurisdiction located in Deschutes County, Oregon. The prevailing party shall be entitled to recover reasonable attorney’s fees.

6. MEDIATION OF DISPUTES. Any controversy or claim arising out of this contract or the breach thereof shall first be referred to non-binding mediation, which shall occur in Deschutes County, Oregon with a mediator of the parties’ mutual choice. If the parties cannot agree on a mediator, the mediator shall be selected by the Presiding Judge of Deschutes County, Oregon.

7. WAIVER. Either party’s failure to insist upon strict performance of any of the terms of this contract will not be construed as a waiver or relinquishment, to any extent, of the right to assert or rely upon such terms, or any other terms, on any future occasion.

8. SEVERABILITY. The invalidity of any provision of this contract will not affect the validity of the remaining provisions, and this contract will be construed as if the invalid provision had been omitted.

9. ENTIRE AGREEMENT; MODIFICATION. This contract, including the attached invoice, constitutes the full understanding of the parties and is a complete and exclusive statement of the terms of their agreement. Any modification of this contract or waiver of its terms must be made in writing and signed by the party claimed to be bound by the modification. No modification of this contract shall be effected by the acknowledgment or acceptance of purchase orders, shipping instruction forms, or any other documents containing terms or conditions different from or in addition to those in this contract, all such different or additional terms being hereby objected to. Unless otherwise agreed by the parties, the provisions of Oregon Revised Statutes Chapter 72 shall apply. BY ORDERING FOR SHIPMENT ANY MATERIAL OR PRODUCT UNDER THIS CONTRACT, BUYER AGREES TO ALL THE TERMS AND CONDITIONS CONTAINED HEREIN.

Named for saddle pads used by rodeo cowboys, our most minimalist tank bag is perfect for riders who “don’t like tank bags.” Completely re-envisioned and redesigned for 2014, the Buckin’ Roll Tank Bag now fits virtually any motorcycle — and keeps all the essentials handy and out of the way when standing on the footpegs.

The Buckin’ Roll Tank Bag – Complete option consists of three components, which can be used individually or in any combination: harness, center Tool Pouch case and Pannier Pockets™.

Pannier Pockets also can be added to Giant Loop’s Fandango/Diablo Tank Bags, or used independently. The 2-liter center case secures to the harness with cam buckle straps. Two 2-liter Pannier Pockets attach to tank, shrouds or engine guards.

Fits virtually any motorcycle make/model. If there’s motorcycle that the Buckin’ Roll Tank Bag WON’T fit we want to hear about it! (Except for step-throughs.)

• Volume: 6 liters (2 liter center case, 2 x 2-liter Pannier Pockets)
• 22 oz vinyl coated polyester Bomb Shell™
• Water resistant YKK zipper
• Nylike webbing
• Reflective accents for visibility
• 2 removable webbing straps w/ aluminum cam-lock buckles
• Multiple webbing MOLLE-style daisy chains
• Mil-spec materials and hardware
• Limited Lifetime Warranty
• Made in USA

Droppin’ into the weather? Combine Bushwackers with rigid hand guards/deflectors and heated grips for the ultimate protection against the elements. Ride safer and longer with warm, dry and clean hands and controls.

REQUIRED EQUIPMENT: Motorcycle must be equipped with rigid hand guards or deflectors to support Bushwackers while riding.

• Cold/wet weather comfort
• Brush, mud and trail protection
• Strap on/off in seconds
• Multiple mounting configurations to fit most motorcycle makes/models equipped with rigid hand guards and/or deflectors
• Tough stretch polyurethane strap (can be used separately)
• Custom wind foil shapes
• No stitching or pieces to fail
• When not using Bushwackers, straps have a thousand other uses: Lash water bottles, fuel, gear to tail rack. Hold flashlight in place while working in dark. And many others!
• Materials: Corona (UV) Treated, Matte Finish, .055 Gauge Polyethylene Plastic
• Made in USA

New 2018 features: Air purge valve, includes two carry straps and D-ring attachments to convert to a backpack, rugged Giant Loop grab handles, additional lash points, two-tone design, lower price. 

Better than top-loading duffels, the 100% waterproof Columbia Dry Bag opens from both ends, providing quick access to gear without unstrapping the Dry Bag from the motorcycle.

Four integrated anchor straps secure the Columbia Dry Bag to virtually any large motorcycle make or model. Compatible with GL’s Siskiyou Panniers and most hard luggage, the 70-liter Columbia Dry Bag includes a shoulder strap and two molded carry handles, and its airline-friendly carry-on luggage size makes it the go-to choice for fly-and-ride motorcycle travel.

An exterior mesh “wet” pocket with zippered access from both sides separates wet gear from dry gear inside, or provides quick storage for travel documents, maps and other small, flat items. Multiple heavy-duty D-ring attachment points add stability when riding off-road. Lash points can be used to secure GL’s Possibles Pouch or other lightweight gear to the outside of the Columbia Dry Bag.

Fits virtually any adventure touring motorcycle make/model — and many other bike types.

• Integrated anchor straps
• 2 molded carry handles
• Shoulder strap for off-bike carrying
• Exterior mesh “wet” pocket with zippered access at both ends
• Gear lash points
• Multiple heavy-duty D-ring attachment points
• Mil-spec materials and hardware
• Limited Lifetime Warranty
• Made in USA
• Volume: 70 liters
• Dimensions (unrolled, flat): 45” long x 20” wide
• 22 oz polyurethane coated polyester Bomb Shell™
• Nylike webbing compression and anchor straps
• Heavy duty side-release and thumb-lock buckles

100% WATERPROOF! The choice for hardcore off-road expeditions. Carry gear for multi-day trips — and still work the entire saddle. Rides on rear fender and/or tail rack. Straps on to dirt bikes and dual sport motorcycles, no passenger pegs required.

• Includes set of 3 roll-top 100% waterproof fitted Dry Pod liners
• Volume: 39 liters
• Rear mounting system — use fender hooks or included webbing loop for easier, more flexible adjustment
• Cinch ring with side-release buckled compression straps
• Zipper defended by storm flap
• Reflective accents for better visibility
• 1 Hot Springs Heat Shield (laser-cut aluminum) + stainless steel clamp included
• Military-spec materials and construction
• Limited Lifetime Warranty
• Made in U.S.A.

• Volume: 39 liters
• Weight: 4.5 lbs (with included Hot Springs Heat Shield + 3 Dry Pods)

Dimensions (fully packed)
61.5″ – bottom of pannier, across top to bottom of other pannier bucket
7″ – height of bag in top center
6″ – distance from inside to outside of pannier bucket bottom
9″ – front to back in top center
Materials
• Outer Bombshell™: 22 oz. vinyl coated polyester reinforced with ballistic nylon
• Beefy YKK coil zipper
• Military-spec fasteners
• Custom-woven ballistic webbing on lower attachments
• Nylike webbing compression straps

Giant Loop’s Diablo Pro Tank Bag (4 liters) delivers rider-friendly features similar to its larger cousin, the Fandango Pro Tank Bag, while remaining true to its minimalist, slim, trim design. Even when standing on the footpegs and riding off-road and trails, this little devil never gets in the way!

An electronics pass-through enables on-bike charging and power inside the tank bag and/or the clear vinyl map pocket top. Add the BikeMaster Dual USB Port/ Plug Charger for a complete plug-and-play solution!

Includes Giant Loop Tank Bag Harness (also available separately to quickly move Tank Bag from one motorcycle to another). Fuel fills are easily accessed by simply unzipping either side from the harness, and the concave front allows vent hoses to breathe.

Other key features: Full interior lining with hook-and-loop accepting fabric, movable divider with elastic tire pressure gauge holder, exterior mesh pocket and D-ring mounts for new optional Pannier Pockets (2 liters each side).

Two 2-liter Pannier Pockets also can be added to the Diablo Tank Bag’s harness and attach to tank, shrouds or engine guards.

• Electronics pass-through integrated throughout each compartment
• Full length interior lining with Veltex hook-and-loop accepting fabric (compatible with many camera bag dividers)
• Movable divider with elastic tire pressure gauge holder
• Exterior mesh pocket
• Easy-access clear vinyl map pocket
• D-ring harness mounts for new optional Pannier Pockets (2 liters each side)
• Mil-spec materials and hardware
• Limited Lifetime Warranty
• Made in USA
• Tank Bag Dimensions: rear 6.5″ tall, front 3.5″ tall, 8″ wide
• Map Pocket Dimensions: 7″ wide x 9″ long
• Harness Dimensions: 8.5″ X 12″
• Volume: 4 liters
• 22 oz vinyl coated polyester Bomb Shell™ reinforced with foam
• Slip-Not and clear vinyl top
• Rubber electronics port
• Water resistant YKK zipper (bag)
• Beefy YKK coil zippers (harness)
• Nylike webbing
• Reflective accents for visibility

Fits virtually any motorcycle make/model — dirt bike, dual sport, enduro, adventure touring and sport bike — with metallic or non-metallic tanks/shrouds.

Giant Loop’s Fandango Pro Tank Bag (8 liters) provides easy access to fuel, room enough to pack gear for a day of riding – or a long-haul journey – while still trim and out of the way for standing on the footpegs riding off-road. 

An electronics pass-through enables on-bike charging and power inside the tank bag and/or the clear vinyl map pocket top (add BikeMaster Dual USB Port/ Plug Charger). Interior fully lined with hook-and-loop accepting fabric (compatible with many camera bag dividers). Movable divider with elastic organizers and tire pressure gauge holder, and an exterior mesh pocket keep everything in its place. And when you find yourself out in the weather, our included waterproof Tank Bag Dry Pod (6 liters) ensures that moisture sensitive gear is well protected inside the highly water resistant Tank Bag.

The Fandango Pro Tank Bag’s underside includes a concealed document pocket, and two separate side zippers for easy mounting to harness.

Includes Giant Loop Tank Bag Harness (also available separately to quickly move Tank Bag from one motorcycle to another). Fuel fills are easily accessed by simply unzipping either side from the harness, and the concave front allows vent hoses to breathe.

UPGRADE: Two 2-liter Pannier Pockets also can be added to the Fandango Tank Bag’s harness and attach to tank, shrouds or engine guards.

• Includes inner waterproof liner Tank Bag Dry Pod (6 liters)
• Concealed document pocket
• Electronics pass-through integrated throughout each compartment
• Full length interior lining with Veltex hook-and-loop accepting fabric (compatible with many camera bag dividers)
• Movable divider with elastic tire pressure gauge holder and organizer slots
• Exterior mesh pocket
• Easy-access clear vinyl map pocket
• D-ring harness mounts for new optional Pannier Pockets (2 liters each side)
• Mil-spec materials and hardware
• Limited Lifetime Warranty
• Made in USA
• Harness Dimensions: 8.5″ wide X 12″ long
• Tank Bag Dimensions: rear 8″ tall, front 5″ tall, 8″ wide
• Volume: 8 liters
• 22 oz vinyl coated polyester Bomb Shell™ reinforced with foam
• Slip-Not and clear vinyl top
• Rubber electronics port
• Water resistant YKK zipper (bag)
• Beefy YKK coil zippers (harness)
• Nylike webbing
• Reflective accents for visibility

Fits virtually any motorcycle make/model — dirt bike, dual sport, enduro, adventure touring and sport bike — with metallic or non-metallic tanks/shrouds.

Dead solid and stable 2-liter zippered Fender Bag fits most standard dirt bike plastics. Perfect for many relatively small, lightweight motorcycling essentials: 21" front inner tube, snacks, gloves and tools.

Specs and Features

• Volume: 2 liters
• Dimensions: 5.25" x 2" x 9.5"
• Includes 2 Rubber Boa Straps - mil-spec elastic shock cord with heavy-duty injection molded components
• 18 oz vinyl coated polyester Bomb Shell™ with 14 oz. vinyl coated polyester storm flap
• Beefy YKK coil zipper
• MOLLE-style webbing lash points
• Reflective accents for visibility
• Mil-spec materials and hardware
• Limited Lifetime Warranty
• Made in USA

Get yourself home in one piece! Basic supplies for field repair of Giant Loop® bags and other adventure motorcycling gear. Use this kit to patch holes, seal seams, replace lost/broken parts and improvise other repairs on the trail.

• Seam Grip® sealer/adhesive + brush
• 22 oz. vinyl truckers tarp patches (5 colors)
• 1-in. Nylike® webbing (1 yd.)
• zinc plated 1-in. cam buckle
• heavy duty 1-in. nylon tension lock buckle
• vinyl coated fender hook
• Giant Loop® vinyl sticker

SOLD AS SET OF 2. Stamped and coined—heavy gauge stainless steel—quick mounts bolt onto bike, keeping straps away from hot exhaust headers, shortening straps lengths for maximum stability and speeding installation of Giant Loop Saddlebags, Panniers, Dry Bags and Tank Bags. • Dimensions: 1.75″ wide x 2.5″ long
• Slot width: 1-1/8″ (fits 1″ webbing)

Giant Loop Tank Bag Dry Pod upgrades your Giant Loop Fandango Tank Bag or Diablo Tank Bag (all versions) to waterproof* protection. Fitted specifically for our tank bags, this seam-sealed liner Dry Pod bag features a hefty YKK water resistant zipper and heavy duty side release buckle closure. Use this high visibility yellow, removable Dry Pod for wet conditions protection – better than cumbersome rain covers that fill with air and fly off.
* Waterproof under normal riding conditions when used inside Giant Loop tank bags – not submersible.
Volume: 6 liters
Removable seam-sealed inner Dry Pod with water-resistant YKK zipper and side-release buckle closure
Shaped specifically to fit Giant Loop’s Fandango Tank Bag and Diablo Tank Bag (all versions)
Limited Lifetime Warranty
Made in USA. Compatible with Giant Loop’s Fandango Tank Bag and Diablo Tank Bag (all versions).

The solution to helmet hair — and protection from the elements.
COLOR: black front with contrasting white stitching, white mesh back
SIZES: adjustable – one size fits most
FRONT features a sun-bleached cow skull, icon of the American West
SIDE reads “GIANT LOOP Bend, Oregon USA”

Carry your gear where the passenger would sit on your bike – the Adventure Proof Great Basin Saddlebag fits virtually any motorcycle designed to carry a passenger. Straps to passenger footrest mounts and rides on pillion seat. Backed by a Limited Lifetime Warranty.

100% WATERPROOF!* Set of 3 seam-sealed, roll top waterproof Dry Pods included. Upgrade your 2013 or older model Great Basin Saddlebag with Great Basin Dry Pods.

• Volume: 60 liters
• Super tough trucker’s tarp Bomb Shell™ reinforced with ballistic nylon
• “Beavertail” and floating compression straps – more ways to carry the gear you need, the way you want it
• Separate mounting and compression straps for easier gear access
• Beefy, easy sliding YKK coil zipper protected by storm flap for water deflection
• Cable lock pass-though to secure bag to bike while parked (optional Kryptonite cable/lock available here)
• Reflective accents for visibility
• 1 Hot Springs Heat Shield (new laser-cut aluminum version) included
• Military-spec materials and construction
• Made in U.S.A.

* Waterproof under normal riding conditions when used inside Giant Loop tank bags – not submersible.

The larger version of Giant Loop’s top-selling Hot Springs Heat Shield for motorcycles, the new Hot Springs Grande Heat Shield maximizes coverage to protect Giant Loop soft luggage from exhaust heat damage, as well as helping prevent dents and dings on the silencer itself.
Virtually universally compatible design fits many motorcycle makes and models. Includes two large stainless steel clamps for easy installation.

• Heavy gauge burnished aluminum with laser-cut logo
• Dimensions: 10-inches long by 3.75-inches wide
• Includes 2 fully threaded 8.5-inch-diameter stainless clamps (26-inch-circumference)
• Fit virtually any motorcycle exhaust
• Weight: 9.1 ounces
• Limited Lifetime Warranty
• Made in USA

Don’t get burned! Giant Loop’s ingeniously simple and effective exhaust shield protects bags and bodywork from heat damage. The Hot Springs Heat Shield helps avoid the meltdown, preventing bags and side panels from touching your bike’s exhaust. It’s the lightweight, universal heat problem-solver for virtually any motorcycle exhaust system. Backed by a Limited Lifetime Warranty.

Highly recommended for the MoJavi Saddlebag, and as additional protection for dual exhaust motorcycles using all Giant Loop Pannier and Saddlebag systems!

• Rugged laser-cut aluminum construction
• Stainless steel clamp included
• Easy to install on virtually any motorcycle make/model
• Dimensions: 6″ long X 2.75″ wide
• Weight: 3.2 oz

Zipperless nested clamshell lid quickly opens and closes with gloves on! Designed for bigger adventure touring bikes and riders carrying camera gear and electronics, the 9-liter Kiger Tank Bag™ is the largest member of the Giant Loop tank bag family, with a generous touchscreen-friendly map pocket that fits many tablet computers and mobile devices. Yet, it’s slim and trim for standing on the pegs riding off-road. Includes removable waterproof* inner liner Dry Pod for wet conditions protection – better than cumbersome rain covers that fill with air and fly off.

* Waterproof under normal riding conditions when used inside Giant Loop tank bags – not submersible.

Hook-and-loop lid attachment provides easy electronics pass-through for on-bike charging and power inside the tank bag. Tank bag mounts to harness with two separate side zippers – upzip and carry the tank bag with you, leaving the harness ready to go. And for fast fuel fills simply unzip either side of the tank bag from the harness, which is cut out to fit the fuel cap. A concave front allows fuel vent hoses to breath.

Handy exterior coated mesh pocket faces rider. Interior mesh pocket under lid closes with zipper. Large clear vinyl map pocket fits many tablet computers with touch screen control through window. The Kiger Tank Bag is named in honor of Oregon’s famed wild horses, the Kiger Mustangs.

Designed and portioned for optimal fit on adventure touring motorcycles. Fits virtually any motorcycle make/model — dirt bike, dual sport, enduro, adventure touring and sport bike — with metallic or non-metallic tanks/shrouds.

UPGRADE: Two 2-liter Pannier Pockets also can be added to the Fandango Tank Bag’s harness and attach to tank, shrouds or engine guards.

HIGHLY RECOMMENDED: Protect tank and plastics with Giant Loop Vinyl Protective Film.

• Zipperless nested clam shell design opens and closes with gloves on
• Includes removable seam-sealed inner Dry Pod with water-resistant YKK zipper and side-release buckle closure
• Easy-access clear vinyl map pocket fits many tablet computers with touch screen control through window
• Hook-and-loop lid attachment provides easy electronics pass-through
• Interior lined with high visibility yellow
• Exterior coated mesh pocket faces rider
• Interior coated mesh pocket under lid closes with zipper
• D-ring harness mounts for new optional Pannier Pockets (2 liters each side)
• Mil-spec materials and hardware
• Limited Lifetime Warranty
• Made in USA

• Volume: 9 liters
• Tank Bag Dimensions: rear 9.5″ tall, front 6″ tall, 8″ wide, 12″ long
• Map Pocket Dimensions: 8″ wide x 9″ long
• Base Dimensions: 8.25″ X 12″
• Exterior Pocket Dimensions: 7.5″ wide x 3.5″ tall
• Interior Pocket Dimensions: 8″ wide x 4.5″ tall
• 22 oz / 22 oz vinyl coated polyester Bomb Shell™ reinforced with foam
• Elastic strap keepers
• Clear vinyl top
• Water resistant YKK zipper (Dry Pod)
• Beefy YKK coil zippers (harness)
• Nylike webbing
• Reflective accents for visibility

Like a tank bag for the rear of bike, the low-profile Klamath Tail Rack Pack keeps gear organized and easily accessible, securing to virtually any motorcycle tail rack. The 4-liter soft luggage case features a zipper-less nested clamshell design inspired by classic motorcycle rally racing packs. Made in USA and constructed with military-spec materials, the Klamath Tail Rack Pack is backed by a Limited Lifetime Warranty.

Mounting options include 2 Forward Tension Mounting Straps (36″ adjustable/removable, 4 Fender/Rack Hook Mounting Straps and 1 Webbing Mounting Strap (36″). Riders can use various combinations to suit a broad spectrum of motorcycle make/models, and tail rack designs. The Klamath Tail Rack Pack also can used in conjunction with Giant Loop’s MoJavi Saddlebag, mounting in place of the saddlebag’s removeable Tool Pouch.

Fits virtually any motorcycle make/model — dirt bike, dual sport, enduro, adventure touring and sport bike. Tail rack or MoJavi Saddlebag highly recommended.

• Zipper-less clamshell design
• Opens with gloves on
• Fully lined with high visibility yellow
• Gear lash cord
• Reflective accents for visibility
• Interior divider – removable, adjustable, tire pressure guage/pen holder
• Key clip
• Zippered mesh pocket under lid
• Exterior mesh pocket
• Mil-spec materials and hardware
• Limited Lifetime Warranty
• Made in USA
• Volume: 4 liters
• Dimensions: 4.75” tall x 8.5” wide x 11” long
• 22 oz vinyl coated polyester Bomb Shell™ reinforced with foam
• Nylike webbing
• Adjustable fender hooks
• Ballistic webbing

We have tested the Mob Armor Smart Phone Handlebar Mount over thousands of miles now with an iPhone 6 in a LifeProof case, as well as an iPhone 5 in a Ballistic case, and it is BOMBER!

The handlebar clamp fits virtually anything with handlebars, including bicycles (we’ve used it on our Rally Raid Honda CB500X Adventure and our KTM 500 EXC), and it installs in about 60 seconds.

The Giant Loop Mob Armor mount handles all but the very most extreme riding (we finally managed to bump the phone out while riding with the throttle pinned in three-foot whoops on the KTM — if you’re riding like this, simply remove the phone from the mount).

The bar/bike mount is the perfect mounting accessory for quick and tool-less installation and removal on square, round, odd shaped rails and bars. The clamp can open its jaws and grab anything between 0.75 inch to 1.5 inch (20mm to 40mm).

We have tested the Mob Armor Smart Phone Handlebar Mount over thousands of miles now with an iPhone 6 in a LifeProof case, as well as an iPhone 5 in a Ballistic case, and it is BOMBER!

The handlebar clamp fits virtually anything with handlebars, including bicycles (we’ve used it on our Rally Raid Honda CB500X Adventure and our KTM 500 EXC), and it installs in about 60 seconds.

The Giant Loop Mob Armor mount handles all but the very most extreme riding (we finally managed to bump the phone out while riding with the throttle pinned in three-foot whoops on the KTM — if you’re riding like this, simply remove the phone from the mount).

The bar/bike mount is the perfect mounting accessory for quick and tool-less installation and removal on square, round, odd shaped rails and bars. The clamp can open its jaws and grab anything between 0.75 inch to 1.5 inch (20mm to 40mm).