Giant Loop’s Diablo Pro Tank Bag (4 liters) delivers rider-friendly features similar to its larger cousin, the Fandango Pro Tank Bag, while remaining true to its minimalist, slim, trim design. Even when standing on the footpegs and riding off-road and trails, this little devil never gets in the way!
An electronics pass-through enables on-bike charging and power inside the tank bag and/or the clear vinyl map pocket top. Add theBikeMaster Dual USB Port/ Plug Chargerfor a complete plug-and-play solution!
IncludesGiant Loop Tank Bag Harness(also available separately to quickly move Tank Bag from one motorcycle to another). Fuel fills are easily accessed by simply unzipping either side from the harness, and the concave front allows vent hoses to breathe.
Other key features: Full interior lining with hook-and-loop accepting fabric, movable divider with elastic tire pressure gauge holder, exterior mesh pocket and D-ring mounts for new optional Pannier Pockets (2 liters each side).
Two 2-literPannier Pocketsalso can be added to the Diablo Tank Bag’s harness and attach to tank, shrouds or engine guards.
Electronics pass-through integrated throughout each compartment
Full length interior lining with Veltex hook-and-loop accepting fabric (compatible with many camera bag dividers)
Movable divider with elastic tire pressure gauge holder
Exterior mesh pocket
Easy-access clear vinyl map pocket
D-ring harness mounts for new optional Pannier Pockets (2 liters each side)
Mil-spec materials and hardware
Limited Lifetime Warranty
Made in USA
Tank Bag Dimensions: rear 6.5″ tall, front 3.5″ tall, 8″ wide
Map Pocket Dimensions: 7″ wide x 9″ long
Harness Dimensions: 8.5″ X 12″
Volume: 4 liters
22 oz vinyl coated polyester Bomb Shell™ reinforced with foam
Slip-Not and clear vinyl top
Rubber electronics port
Water resistant YKK zipper (bag)
Beefy YKK coil zippers (harness)
Reflective accents for visibility
Fits virtually any motorcycle make/model — dirt bike, dual sport, enduro, adventure touring and sport bike — with metallic or non-metallic tanks/shrouds.
NOTE: Intended only for the temporary transport of liquid hydrocarbons for racing vehicles used in professional off road and closed course competition racing events. The Gas Bag Fuel Safe Bladder is not a portable or long-term fuel storage container as described by ASTM, EPA, ARB or other state or federal agencies. BY PURCHASING PRODUCT AND FILLING IT WITH FUEL YOU ARE AGREEING TO THE TERMS AND CONDITIONS LISTED HERE ON THIS PAGE.
Giant Loop’s Gas Bag™ Fuel Safe Bladder conveniently transports your fuel for power sports racing in a collapsible welded film and ballistic nylon reinforced container that rolls up or packs flat when empty, weighing less than 1 pound. Gas Bag Fuel Safe Bladders are compatible with motorcycles, snowmobiles, snow bikes (e.g., Timbersled, Moto Trax), ATVs, UTVs and 4x4s, providing a lightweight, compact means of transporting gas foroff-road racing on closed courses.
Materials & Construction: Welded film bladder sewn into ballistic nylon sleeve with webbing daisy chain anchor points and handles.
Made in U.S.A.
The Giant Loop Gas Bag™ Fuel Safe Bladder is intended only for the temporary transport of liquid hydrocarbons for racing vehicles used in professional off road and closed course competition racing events only. The Gas Bag Fuel Safe Bladder is not a portable or long-term fuel storage container as described by ASTM, EPA, ARB or other state or federal agencies. By purchasing and filling this product with fuel, you agree that you have been trained in the safe handling of racing fuels; you agree that you will use the product for its designed and intended purpose; you assume all responsibility for the proper safe use of this product. 1. GENERAL WARRANTIES OF SELLER. THE MATERIALS AND PRODUCTS ARE SUPPLIED “AS IS” AND “WITH ALL FAULTS”. No warranties except those implied by law and which cannot be excluded are given by Seller, its manufacturers, distributors, owners, employees, directors, vendors, promoters, parent companies or affiliates in respect of the materials and products supplied. SELLER EXPRESSLY DISCLAIMS THE IMPLIED WARRANTIES OF MERCHANTABILITY AND OF FITNESS FOR A PARTICULAR PURPOSE.
2.DISCLAIMER OF PRODUCT LIABILITY AND LIMITATION OF REMEDIES.Notwithstanding Seller’s excellent safety record; RACING, PIT STOPS AND FLAMMABLE FUEL HANDLING ARE INHERENTLY VERY DANGEROUS ACTIVITIES. IN ADDITION, RUBBER PRODUCTS DETERIORATE RAPIDLY WHEN EXPOSED TO LIGHT, HEAT OR REPEATED STRETCHING AND FLEXING. SUCH DETERIORATION MATERIALLY AFFECTS THE USEFUL LIFE OF RUBBER PRODUCTS. The Buyer acknowledges and warrants that it has relied on its own skill and judgment or that of its professional advisers on the suitability of the materials or products for specific purposes and indemnifies and holds Seller harmless from and against any suit, claim, demand or compensation which the user or consumer or others may have against Seller in relation to the materials or products provided hereunder and the user or consumer’s use of the products or materials. Where it is lawful to do so, the liability of Seller for a breach of a condition or warranty is limited to either the rectification or replacement of the materials or products or a refund of the purchase price paid for the materials or products (excluding any delivery charges), as determined by Seller in its discretion. This remedy is expressly agreed to be exclusive. To the extent permitted by law, Seller will not be liable for any consequential loss or damage suffered as a result of the use of materials or products supplied by Seller. ALL RISKS ARE ASSUMED BY THE USER OR CONSUMER.
3.TITLE AND RISK OF LOSS.Title to, and all risk of loss of, any materials or products sold hereunder shall pass to the Buyer at the point of shipment.
4.FORCE MAJEURE.Seller may, without liability, delay performance or cancel this contract on account of force majeure events or other circumstances beyond its control, including but not limited to strikes, acts of God, political unrest, embargo, failure of source of supply, or casualty.
5.GOVERNING LAW; VENUE.The parties agree this contract shall be governed by the domestic law of the State of Oregon. Venue of any action or claim shall be brought exclusively in a court of competent jurisdiction located in Deschutes County, Oregon. The prevailing party shall be entitled to recover reasonable attorney’s fees.
6.MEDIATION OF DISPUTES.Any controversy or claim arising out of this contract or the breach thereof shall first be referred to non-binding mediation, which shall occur in Deschutes County, Oregon with a mediator of the parties’ mutual choice. If the parties cannot agree on a mediator, the mediator shall be selected by the Presiding Judge of Deschutes County, Oregon.
7.WAIVER.Either party’s failure to insist upon strict performance of any of the terms of this contract will not be construed as a waiver or relinquishment, to any extent, of the right to assert or rely upon such terms, or any other terms, on any future occasion.
8.SEVERABILITY. The invalidity of any provision of this contract will not affect the validity of the remaining provisions, and this contract will be construed as if the invalid provision had been omitted.
9.ENTIRE AGREEMENT; MODIFICATION.This contract, including the attached invoice, constitutes the full understanding of the parties and is a complete and exclusive statement of the terms of their agreement. Any modification of this contract or waiver of its terms must be made in writing and signed by the party claimed to be bound by the modification. No modification of this contract shall be effected by the acknowledgment or acceptance of purchase orders, shipping instruction forms, or any other documents containing terms or conditions different from or in addition to those in this contract, all such different or additional terms being hereby objected to. Unless otherwise agreed by the parties, the provisions of Oregon Revised Statutes Chapter 72 shall apply.BY ORDERING FOR SHIPMENT ANY MATERIAL OR PRODUCT UNDER THIS CONTRACT, BUYER AGREES TO ALL THE TERMS AND CONDITIONS CONTAINED HEREIN.
Buckin' Roll Tank Bag SOLD OUT New Updated Version Fall 2018
Named for saddle pads used by rodeo cowboys, our most minimalist tank bag is perfect for riders who “don’t like tank bags.” Completely re-envisioned and redesigned for 2014, the Buckin’ Roll Tank Bag now fits virtually any motorcycle — and keeps all the essentials handy and out of the way when standing on the footpegs.
The Buckin’ Roll Tank Bag – Complete option consists of three components, which can be used individually or in any combination: harness, center Tool Pouch case and Pannier Pockets™.
Pannier Pockets also can be added to Giant Loop’s Fandango/Diablo Tank Bags, or used independently. The 2-liter center case secures to the harness with cam buckle straps. Two 2-liter Pannier Pockets attach to tank, shrouds or engine guards.
Fits virtually any motorcycle make/model. If there’s motorcycle that the Buckin’ Roll Tank Bag WON’T fit we want to hear about it! (Except for step-throughs.)
• Volume: 6 liters (2 liter center case, 2 x 2-liter Pannier Pockets) • 22 oz vinyl coated polyester Bomb Shell™ • Water resistant YKK zipper • Nylike webbing • Reflective accents for visibility • 2 removable webbing straps w/ aluminum cam-lock buckles • Multiple webbing MOLLE-style daisy chains • Mil-spec materials and hardware • Limited Lifetime Warranty • Made in USA
Bushwackers Hand Guards
Droppin’ into the weather? Combine Bushwackers with rigid hand guards/deflectors and heated grips for the ultimate protection against the elements. Ride safer and longer with warm, dry and clean hands and controls.
REQUIRED EQUIPMENT: Motorcycle must be equipped with rigid hand guards or deflectors to support Bushwackers while riding.
• Cold/wet weather comfort • Brush, mud and trail protection • Strap on/off in seconds • Multiple mounting configurations to fit most motorcycle makes/models equipped with rigid hand guards and/or deflectors • Tough stretch polyurethane strap (can be used separately) • Custom wind foil shapes • No stitching or pieces to fail • When not using Bushwackers, straps have a thousand other uses: Lash water bottles, fuel, gear to tail rack. Hold flashlight in place while working in dark. And many others! • Materials: Corona (UV) Treated, Matte Finish, .055 Gauge Polyethylene Plastic • Made in USA
Columbia Dry Bag
New 2018 features: Air purge valve, includes two carry straps and D-ring attachments to convert to a backpack, rugged Giant Loop grab handles, additional lash points, two-tone design, lower price.
Better than top-loading duffels, the 100% waterproof Columbia Dry Bag opens from both ends, providing quick access to gear without unstrapping the Dry Bag from the motorcycle.
Four integrated anchor straps secure the Columbia Dry Bag to virtually any large motorcycle make or model. Compatible with GL’s Siskiyou Panniers and most hard luggage, the 70-liter Columbia Dry Bag includes a shoulder strap and two molded carry handles, and its airline-friendly carry-on luggage size makes it the go-to choice for fly-and-ride motorcycle travel.
An exterior mesh “wet” pocket with zippered access from both sides separates wet gear from dry gear inside, or provides quick storage for travel documents, maps and other small, flat items. Multiple heavy-duty D-ring attachment points add stability when riding off-road. Lash points can be used to secure GL’s Possibles Pouch or other lightweight gear to the outside of the Columbia Dry Bag.
Fits virtually any adventure touring motorcycle make/model — and many other bike types.
• Integrated anchor straps • 2 molded carry handles • Shoulder strap for off-bike carrying • Exterior mesh “wet” pocket with zippered access at both ends • Gear lash points • Multiple heavy-duty D-ring attachment points • Mil-spec materials and hardware • Limited Lifetime Warranty • Made in USA • Volume: 70 liters • Dimensions (unrolled, flat): 45” long x 20” wide • 22 oz polyurethane coated polyester Bomb Shell™ • Nylike webbing compression and anchor straps • Heavy duty side-release and thumb-lock buckles
Coyote Saddle Bag
100% WATERPROOF! The choice for hardcore off-road expeditions. Carry gear for multi-day trips — and still work the entire saddle. Rides on rear fender and/or tail rack. Straps on to dirt bikes and dual sport motorcycles, no passenger pegs required.
• Includes set of 3 roll-top 100% waterproof fitted Dry Pod liners • Volume: 39 liters • Rear mounting system — use fender hooks or included webbing loop for easier, more flexible adjustment • Cinch ring with side-release buckled compression straps • Zipper defended by storm flap • Reflective accents for better visibility • 1 Hot Springs Heat Shield (laser-cut aluminum) + stainless steel clamp included • Military-spec materials and construction • Limited Lifetime Warranty • Made in U.S.A.
• Volume: 39 liters • Weight: 4.5 lbs (with included Hot Springs Heat Shield + 3 Dry Pods)
Dimensions (fully packed) 61.5″ – bottom of pannier, across top to bottom of other pannier bucket 7″ – height of bag in top center 6″ – distance from inside to outside of pannier bucket bottom 9″ – front to back in top center Materials • Outer Bombshell™: 22 oz. vinyl coated polyester reinforced with ballistic nylon • Beefy YKK coil zipper • Military-spec fasteners • Custom-woven ballistic webbing on lower attachments • Nylike webbing compression straps